Plastic pressure reducer
GEMÜ N182
For all sales-related matters:
Tel: +61 (0) 2 4323 4493
Reliable pressure control valve available in DN 10 to DN 50
Product information
The GEMÜ N182 pressure reducer ensures that a constant outlet pressure is maintained in process plants by utilizing the pressure differential. If the pressure increases on the outlet side, the spring force is lower and the spring is raised, closing the valve. The pressure is reduced until the spring force and the outlet pressure are the same. If the pressure falls, the spring force presses against the diaphragm surface via the control aperture, opening the valve. Depending on requirements, the outlet pressure can be read off a diaphragm-protected pressure gauge and the spring force adjusted using a set screw.
Key features
- The working pressure can be very easily adjusted using a set screw and secured with the integrated lock nut. If required, the setting that has been made can be lead sealed
- The flow-efficient design of the valve body ensures good flow rate values
- Control errors are kept to a minimum due to the large control face and the spiral spring
- The actuator is hermetically separated from the medium
Technical features
Parameters
Value
Media temperature
-20 to 100 °C
Ambient temperature
0 to 60 °C
custom_technical_data_Betriebsdruck*
0 to 10 bar
custom_technical_data_Nennweiten*
DN 10 to 50
Connection types
Flange
Spigot
Union end
Connection standards
DIN
EN
ISO
Body materials
PP-B, grey
PVC-U, grey
PVDF
Conformities
EAC
Downloads
5 Results
- Datasheet GEMÜ N082, N182
- Технические характеристики GEMÜ N182, N082
- Fiche technique GEMÜ N082, N182
- Datasheet GEMÜ N082, N182 (US)
- Datenblatt GEMÜ N082, N182
