Butt weld spigot
Pneumatic
Linear actuator
PFA inliner; PVDF outliner
6 bar
90 ° C
DN 40 (1 1/2''); DN 50 (2'')
Clamp; Spigot; Threaded connection; Threaded socket
Manual
; 1.4408, investment casting; 1.4435, investment casting material
10 bar
100 ° C
-10 ° C
DN 4; DN 6; DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2'')
max. 150 °C
Clamp; Spigot; Threaded connection; Threaded socket
Pneumatic
1.4435 (316L), forged body material; 1.4435, investment casting material
8 bar
100 ° C
-10 ° C
DN 4; DN 6; DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2'')
max. 150 °C
Clamp; Spigot; Threaded connection; Threaded socket
Manual
1.4435 (316L), forged body material; 1.4435, investment casting material; CW617N (brass)
10 bar
80 ° C
-10 ° C
DN 10 (3/8''); DN 12; DN 15 (1/2''); DN 20 (3/4'')
Clamp; Flange; Spigot; Threaded connection; Threaded socket
Manual
; 1.4408, investment casting; 1.4435, investment casting material
10 bar
100 ° C
-10 ° C
DN 10 (3/8''); DN 12; DN 15 (1/2''); DN 20 (3/4'')
max. 150 °C
Clamp; Spigot; Threaded connection; Threaded socket
Pneumatic
1.4435 (316L), forged body material; 1.4435, investment casting material; CW617N (brass)
6 bar
80 ° C
-10 ° C
DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4'')
Flare; Solvent cement socket; Spigot; Union end
Manual
PP; PP-H; PVC-U; PVDF
6 bar
80 ° C
-20 ° C
DN 12; DN 15 (1/2''); DN 20 (3/4'')
Flange; Threaded socket
Pneumatic
EN-GJL-250; EN-GJS-400-18-LT (GGG 40.3), PFA lined; EN-GJS-400-18-LT (GGG 40.3), PP lined; EN-GJS-400-18-LT, hard rubber lined; EN-GJS-500-7, PFA lined; EN-GJS-500-7, PP lined
10 bar
100 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4''); DN 125 (5''); DN 150 (6'')
Clamp; Spigot; Threaded connection; Threaded socket
Pneumatic
1.4435 (316L), forged body material; 1.4435, investment casting material
6 bar
100 ° C
-10 ° C
DN 10 (3/8''); DN 12; DN 15 (1/2''); DN 20 (3/4'')
max. 150 °C
7 bar
100 ° C
DN 25 (1''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4''); DN 125 (5''); DN 150 (6'')
Spigot
Manual
1.4435, block material
10 bar
100 ° C
-10 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2'')
max. 150 °C
Clamp; Flange; Spigot; Threaded connection; Threaded socket
Motorized
Cast iron body; Forged body from 1.4435 or 1.4539; Investment cast body from 1.4408 or 1.4435; Investment cast body from 1.4408 with plastic lining; SG iron valve body with elastomer or plastic lining
10 bar
100 ° C
-10 ° C
DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2'')
Clamp; Flange; Spigot; Threaded connection; Threaded socket
Pneumatic
1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material; 1.4539
10 bar
100 ° C
-10 ° C
DN 4; DN 6; DN 8 (1/4''); DN 10 (3/8''); DN 12; DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4'')
max. 150 °C
Clamp; Spigot; Threaded connection
Manual
1.4435 (316L), forged body material; 1.4435, block material; 1.4435, investment casting material
8 bar
100 ° C
-10 ° C
DN 8 (1/4''); DN 10 (3/8''); DN 25 (1'')
max. 150 °C
Clamp; Spigot; Threaded connection; Threaded socket
Pneumatic
1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material
10 bar
100 ° C
-10 ° C
DN 4; DN 6; DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4''); DN 25 (1'')
max. 150 °C
Clamp; Flange; Spigot; Threaded connection; Threaded socket
Manual
1.4408, PFA lined; 1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material
10 bar
100 ° C
-10 ° C
DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4'')
max. 150 °C
Clamp; Flange; Spigot; Threaded connection; Threaded socket
Manual
1.4408, PFA lined; 1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material
10 bar
100 ° C
-10 ° C
DN 4; DN 6; DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4'')
max. 150 °C
Flange
Manual
EN-GJL-250; EN-GJL-250 (GG-25), hard rubber lined; EN-GJL-250, soft rubber lined
7 bar
100 ° C
DN 25 (1''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4''); DN 125 (5''); DN 150 (6''); DN 200; DN 250; DN 300
Clamp; Spigot; Threaded connection; Threaded socket
Pneumatic
1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material
10 bar
100 ° C
-10 ° C
DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4'')
max. 150 °C
Clamp; Spigot; Threaded connection; Threaded socket
Pneumatic
1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material
5 bar
100 ° C
-10 ° C
DN 4; DN 6; DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4''); DN 25 (1'')
max. 150 °C
Clamp; Flange; Spigot; Threaded connection; Threaded socket
Manual
1.4408, PFA lined; 1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material; EN-GJL-250; EN-GJS-400-18-LT (GGG 40.3), PFA lined; EN-GJS-400-18-LT (GGG 40.3), PP lined
10 bar
80 ° C
-10 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4'')
Clamp; Flange; Spigot; Threaded connection; Threaded socket
Manual
; 1.4408, investment casting; 1.4435, investment casting material
10 bar
100 ° C
-10 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2'')
max. 150 °C
Clamp; Flange; Spigot; Threaded connection
Manual
; 1.4408, investment casting; 1.4435, investment casting material
10 bar
100 ° C
-10 ° C
DN 8 (1/4''); DN 10 (3/8''); DN 25 (1''); DN 40 (1 1/2''); DN 50 (2'')
max. 150 °C
Flange; Threaded socket
Manual
EN-GJL-250; EN-GJS-400-18-LT (GGG 40.3), PFA lined; EN-GJS-400-18-LT (GGG 40.3), PP lined; EN-GJS-400-18-LT, hard rubber lined; EN-GJS-500-7, PFA lined; EN-GJS-500-7, PP lined
10 bar
150 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4''); DN 125 (5''); DN 150 (6'')
Butt weld spigot
Manual
Linear actuator
; PVDF
10 bar
80 ° C
-20 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4'')
Clamp; Flange; Spigot; Threaded connection; Threaded socket
Pneumatic
1.4408, PFA lined; 1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material; EN-GJS-400-18-LT (GGG 40.3), PFA lined; EN-GJS-400-18-LT (GGG 40.3), PP lined; EN-GJS-400-18-LT, hard rubber lined
10 bar
100 ° C
-10 ° C
DN 10 (3/8''); DN 12; DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4'')
max. 150 °C
Clamp; Flange; Spigot; Threaded connection; Threaded socket
Pneumatic
1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material
10 bar
100 ° C
-10 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2'')
max. 150 °C
Spigot
Pneumatic
Linear actuator
; Inliner PP-H, grey / outliner PP, reinforced; PVDF
10 bar
80 ° C
-10 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 100 (4'')
Clamp; Flange; Spigot; Threaded connection; Threaded socket
Pneumatic
1.4408, PFA lined; 1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material; EN-GJL-250; EN-GJS-400-18-LT (GGG 40.3), PFA lined; EN-GJS-400-18-LT (GGG 40.3), PP lined; EN-GJS-400-18-LT, hard rubber lined
10 bar
80 ° C
-10 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2'')
Clamp; Flange; Spigot; Threaded connection; Threaded socket
Motorized
1.4408, PFA lined; 1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material; EN-GJL-250; EN-GJS-400-18-LT (GGG 40.3), PFA lined; EN-GJS-400-18-LT (GGG 40.3), PP lined; EN-GJS-400-18-LT, hard rubber lined
10 bar
100 ° C
-10 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2'')
max. 150 °C
Butt weld spigot; Flare
Pneumatic
PFA
6 bar
150 ° C
-10 ° C
DN 4; DN 6; DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4''); DN 25 (1'')
Butt weld spigot; Flare
Manual
PFA
6 bar
150 ° C
-10 ° C
DN 4; DN 6; DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4''); DN 25 (1'')
Flange; Spigot; Union end
Pneumatic
ABS; PP inliner / outliner; PVC-U; PVDF inliner
6 bar
80 ° C
-20 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2'')
Flange; Spigot; Union end
Manual
ABS; Inliner PP-H, grey / outliner PP, reinforced; Inliner PVDF / outliner PP, reinforced; PP (GF); PP inliner / outliner; PVC-U; PVDF
10 bar
80 ° C
-20 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4'')
Flange; Spigot; Union end
Pneumatic
ABS; Inliner PP-H, grey / outliner PP, reinforced; Inliner PVDF / outliner PP, reinforced; PP (GF); PVC-U; PVDF
10 bar
80 ° C
-20 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4'')
Clamp; Hose barb
PP-R natural
4; 9 bar
40 ° C
5 ° C
DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4''); DN 25 (1'')
max. 134 °C
Clamp; Hose barb
Manual
PP-R natural
4; 9 bar
40 ° C
5 ° C
DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4''); DN 25 (1'')
max. 134 °C