The GEMÜ 102 directly controlled 2/2-way solenoid valve has a completely plastic encapsulated coil. The armature is sealed by a bellows made of PTFE backed by an additional safety diaphragm. The valve body is available in various materials and with a straight through or angle valve body design.
- Company
- Products
- Valve designs
- Butterfly valves
- CONEXO - Valves with RFID
- Pressure control valves
- Fittings & tubes
- Ball valves
- Solenoid valves
- Electric valves
- Multi-port valve blocks
- Diaphragm valves
- Diaphragms
- Diaphragm globe valves
- Control valves
- Check valves
- Globe Valves
- Single Use Valves
- Valve actuators
- Pilot valves
- Bottom outlet and container valves
- Accessories valve designs
- Valve knowledge
- Measurement and control engineering
- Customer solutions
- Medical
- LEAP INTO THE FUTURE
- Valve designs
- Applications
- Download
- Service
- News
- Contacts
- Good cleanability
- Hermetic separation between medium and actuator
- The solenoid can be replaced without removing the valve body from the piping
- Media temperature :-20 to 100 °C
- Ambient temperature:10 to 40 °C
- Operating pressure :0 to 4 bar
- Nominal sizes:DN 6 to 10
- Connection types:Solvent cement socket | Threaded connection
- Connection standards:DIN | ISO
- Body materials:PVC-U, grey | PVDF
- Supply voltages:12 V DC | 120 V AC, 50/60 Hz | 230 V AC, 50/60 Hz | 24 V AC, 50/60 Hz | 24 V DC
- Protection class:IP 65
- Conformities:EAC | UL Recognized US