The GEMÜ 8259 2/2-way direct acting solenoid valve has a brass or stainless steel valve body. All media wetted parts are made of FKM, NBR, PTFE, EPDM, brass or stainless steel. The valve is suitable for inert liquids and gases.
- Company
- Products
- Valve designs
- Butterfly valves
- CONEXO - Valves with RFID
- Pressure control valves
- Fittings & tubes
- Ball valves
- Solenoid valves
- Electric valves
- Multi-port valve blocks
- Diaphragm valves
- Diaphragms
- Diaphragm globe valves
- Control valves
- Check valves
- Globe Valves
- Single Use Valves
- Valve actuators
- Pilot valves
- Bottom outlet and container valves
- Accessories valve designs
- Valve knowledge
- Measurement and control engineering
- Customer solutions
- Medical
- LEAP INTO THE FUTURE
- Valve designs
- Applications
- Download
- Service
- News
- Contacts
- Direct acting, normally open or normally closed
- Valve operates without minimum pressure differential
- High flow rates
- Compact design
- Simple coil replacement without tools (Click-on®)
- Suitable for vacuum applications
- Explosion protected solenoids acc. to ATEX available as an option
- UL and CSA approval available
- Various threaded connections per nominal size
- Media temperature :-10 to 110 °C
- Ambient temperature:-10 to 50 °C
- Operating pressure :0 to 20 bar
- Nominal sizes:DN 2 to 5
- Connection types:Threaded connection
- Connection standards:DIN | ISO | NPT
- Body materials:1.4408, investment casting material | CW617N, brass
- Supply voltages:110 V AC, 50 Hz | 230 V AC, 50 Hz | 24 V DC
- Conformities:ATEX | EAC