This website uses cookies.

On our web pages and in our online shop, we use strictly necessary cookies and cookies that are needed to process your queries. We also use tracking cookies, which help us to optimize our online presence and offer you a better browsing experience as a result. ...

You can find further information in our Data Protection Statement. Data protection statement

Functional cookies

These cookies are strictly necessary to enable you to use all the functions and features of GEMÜ web pages. Consequently, they are enabled by default and cannot be disabled. If you wish to avoid these cookies, you can do so by changing the settings in your browser.

Web analysis cookies

Here you can decide whether you want to allow a unique web analysis cookie to be stored in your browser that will enable the website operator to record and analyse various statistical data. If you do not want to allow this, click on the following link to store the Piwik opt-out cookie in your browser.

Unfortunately, GEMÜ is currently unable to store settings for multiple browsers or about multiple user accounts. It is also possible that, irrespective of the security settings you have set in your browser, the cookies set by GEMÜ will be deleted when you close the browser and will therefore no longer be available in your next session. If you close or change your browser, or if you use more than one PC, you may have to make some of the changes again.

Diaphragm valves: Product overview

GEMÜ 600HP
600HP
Butt weld spigot
Pneumatic
Linear actuator
PFA inliner; PVDF outliner
6 bar
90 ° C
DN 40 (1 1/2''); DN 50 (2'')
GEMÜ 601
601
Clamp; Spigot; Thread; Threaded socket
Manual
; 1.4408, investment casting; 1.4435, investment casting material
10 bar
100 ° C
-10 ° C
DN 4; DN 6; DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2'')
max. 150 °C
GEMÜ 602
602
Clamp; Spigot; Thread; Threaded socket
Manual
; 1.4408, investment casting; 1.4435, investment casting material
10 bar
100 ° C
-10 ° C
DN 4; DN 6; DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2'')
max. 150 °C
GEMÜ 605
605
Clamp; Spigot; Thread; Threaded socket
Pneumatic
1.4435 (316L), forged body material; 1.4435, investment casting material
8 bar
100 ° C
-10 ° C
DN 4; DN 6; DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2'')
max. 150 °C
GEMÜ 607
607
Spigot
PP; PVC-U; PVDF
10 bar
80 ° C
-10 ° C
GEMÜ 610
610
Flare; Solvent cement socket; Spigot; Threaded socket; Union end
Pneumatic
PP; PVC-U; PVDF
6 bar
80 ° C
-20 ° C
DN 12; DN 15 (1/2''); DN 20 (3/4'')
GEMÜ 611
611
Clamp; Spigot; Thread; Threaded socket
Manual
1.4435 (316L), forged body material; 1.4435, investment casting material; CW617N (brass)
10 bar
80 ° C
-10 ° C
DN 10 (3/8''); DN 12; DN 15 (1/2''); DN 20 (3/4'')
GEMÜ 612
612
Clamp; Flange; Spigot; Thread; Threaded socket
Manual
; 1.4408, investment casting; 1.4435, investment casting material
10 bar
100 ° C
-10 ° C
DN 10 (3/8''); DN 12; DN 15 (1/2''); DN 20 (3/4'')
max. 150 °C
GEMÜ 613
613
Solvent cement socket; Spigot; Threaded socket; Union end
Motorized
PP; PVC-U; PVDF
6 bar
80 ° C
-20 ° C
DN 12; DN 15 (1/2'')
GEMÜ 615
615
Clamp; Spigot; Thread; Threaded socket
Pneumatic
1.4435 (316L), forged body material; 1.4435, investment casting material; CW617N (brass)
6 bar
80 ° C
-10 ° C
DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4'')
GEMÜ 617
617
Flare; Solvent cement socket; Spigot; Union end
Manual
PP; PP-H; PVC-U; PVDF
6 bar
80 ° C
-20 ° C
DN 12; DN 15 (1/2''); DN 20 (3/4'')
GEMÜ 618
618
Clamp; Spigot; Thread; Threaded socket
Motorized
1.4435 (316L), forged body material; 1.4435, investment casting material; CW617N (brass)
6 bar
100 ° C
-10 ° C
DN 4; DN 6; DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4'')
max. 150 °C
GEMÜ 620
620
Flange; Threaded socket
Pneumatic
EN-GJL-250; EN-GJS-400-18-LT (GGG 40.3), PFA lined; EN-GJS-400-18-LT (GGG 40.3), PP lined; EN-GJS-400-18-LT, hard rubber lined; EN-GJS-500-7, PFA lined; EN-GJS-500-7, PP lined
10 bar
100 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4''); DN 125 (5''); DN 150 (6'')
GEMÜ 625
625
Clamp; Spigot; Thread; Threaded socket
Pneumatic
1.4435 (316L), forged body material; 1.4435, investment casting material
6 bar
100 ° C
-10 ° C
DN 10 (3/8''); DN 12; DN 15 (1/2''); DN 20 (3/4'')
max. 150 °C
GEMÜ 630
630
Flare; Solvent cement socket; Spigot; Threaded socket; Union end
Pneumatic
ABS; Inliner PP-H, grey / outliner PP, reinforced; PP (GF); PP-H; PVC-U; PVDF
6 bar
80 ° C
-20 ° C
DN 12; DN 15 (1/2''); DN 20 (3/4'')
GEMÜ 635
635
10 bar
80 ° C
-10 ° C
GEMÜ 638
638
7 bar
100 ° C
DN 25 (1''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4''); DN 125 (5''); DN 150 (6'')
GEMÜ 643
643
Spigot
Manual
1.4435, block material
10 bar
100 ° C
-10 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2'')
max. 150 °C
GEMÜ 648
648
Spigot
Motorized
1.4408, PFA lined; 1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material; ABS; EN-GJL-250; EN-GJS-400-18-LT (GGG 40.3), PFA lined; EN-GJS-400-18-LT (GGG 40.3), PP lined; EN-GJS-400-18-LT, hard rubber lined; EN-GJS-500-7, PFA lined; EN-GJS-500-7, PP lined; PP; PP inliner / outliner; PVC; PVDF
10 bar
150 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4'')
GEMÜ 649
649
Clamp; Flange; Spigot; Thread; Threaded socket
Motorized
Cast iron body; Forged body from 1.4435 or 1.4539; Investment cast body from 1.4408 or 1.4435; Investment cast body from 1.4408 with plastic lining; SG iron valve body with elastomer or plastic lining
10 bar
100 ° C
-10 ° C
DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2'')
GEMÜ 650
650
Clamp; Flange; Spigot; Thread; Threaded socket
Pneumatic
1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material; 1.4539
10 bar
100 ° C
-10 ° C
DN 4; DN 6; DN 8 (1/4''); DN 10 (3/8''); DN 12; DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4'')
max. 150 °C
GEMÜ 650TL
650TL
Clamp; Spigot; Thread
Manual
1.4435 (316L), forged body material; 1.4435, block material; 1.4435, investment casting material
8 bar
100 ° C
-10 ° C
DN 8 (1/4''); DN 10 (3/8''); DN 25 (1'')
max. 150 °C
GEMÜ 651
651
Clamp; Spigot; Thread; Threaded socket
Pneumatic
1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material
10 bar
100 ° C
-10 ° C
DN 4; DN 6; DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4''); DN 25 (1'')
max. 150 °C
GEMÜ 653
653
Clamp; Flange; Spigot; Thread; Threaded socket
Manual
1.4408, PFA lined; 1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material
10 bar
100 ° C
-10 ° C
DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4'')
max. 150 °C
GEMÜ 654
654
Clamp; Flange; Spigot; Thread; Threaded socket
Manual
1.4408, PFA lined; 1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material
10 bar
100 ° C
-10 ° C
DN 4; DN 6; DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4'')
max. 150 °C
GEMÜ 655
655
Flange
Manual
EN-GJL-250; EN-GJL-250 (GG-25), hard rubber lined; EN-GJL-250, soft rubber lined
7 bar
100 ° C
DN 25 (1''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4''); DN 125 (5''); DN 150 (6''); DN 200; DN 250; DN 300
GEMÜ 656
656
Flange
Pneumatic
EN-GJL-250; EN-GJL-250 (GG-25), hard rubber lined; EN-GJL-250, soft rubber lined
7 bar
100 ° C
DN 25 (1''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4''); DN 125 (5''); DN 150 (6''); DN 200; DN 250
GEMÜ 658
658
Clamp; Spigot; Thread; Threaded socket
Pneumatic
1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material
10 bar
100 ° C
-10 ° C
DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4'')
max. 150 °C
GEMÜ 660
660
Clamp; Spigot; Thread; Threaded socket
Pneumatic
1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material
5 bar
100 ° C
-10 ° C
DN 4; DN 6; DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4''); DN 25 (1'')
max. 150 °C
GEMÜ 671
671
Clamp; Flange; Spigot; Thread; Threaded socket
Manual
1.4408, PFA lined; 1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material; EN-GJL-250; EN-GJS-400-18-LT (GGG 40.3), PFA lined; EN-GJS-400-18-LT (GGG 40.3), PP lined
10 bar
80 ° C
-10 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4'')
GEMÜ 673
673
Clamp; Flange; Spigot; Thread; Threaded socket
Manual
; 1.4408, investment casting; 1.4435, investment casting material
10 bar
100 ° C
-10 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2'')
max. 150 °C
GEMÜ 673P9
673P9
Clamp; Flange; Spigot; Thread
Manual
; 1.4408, investment casting; 1.4435, investment casting material
10 bar
100 ° C
-10 ° C
DN 8 (1/4''); DN 10 (3/8''); DN 25 (1''); DN 40 (1 1/2''); DN 50 (2'')
max. 150 °C
GEMÜ 675
675
Flange; Threaded socket
Manual
EN-GJL-250; EN-GJS-400-18-LT (GGG 40.3), PFA lined; EN-GJS-400-18-LT (GGG 40.3), PP lined; EN-GJS-400-18-LT, hard rubber lined; EN-GJS-500-7, PFA lined; EN-GJS-500-7, PP lined
10 bar
150 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4''); DN 125 (5''); DN 150 (6'')
GEMÜ 677HP
677HP
Butt weld spigot
Manual
Linear actuator
; PVDF
10 bar
80 ° C
-20 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4'')
GEMÜ 687
687
Clamp; Flange; Spigot; Thread; Threaded socket
Pneumatic
1.4408, PFA lined; 1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material; EN-GJS-400-18-LT (GGG 40.3), PFA lined; EN-GJS-400-18-LT (GGG 40.3), PP lined; EN-GJS-400-18-LT, hard rubber lined
10 bar
100 ° C
-10 ° C
DN 10 (3/8''); DN 12; DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4'')
max. 150 °C
GEMÜ 688
688
Clamp; Flange; Spigot; Thread; Threaded socket
Pneumatic
1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material
10 bar
100 ° C
-10 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2'')
max. 150 °C
GEMÜ 690HP
690HP
Spigot
Pneumatic
Linear actuator
; Inliner PP-H, grey / outliner PP, reinforced; PVDF
10 bar
80 ° C
-10 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 100 (4'')
GEMÜ 695
695
Clamp; Flange; Spigot; Thread; Threaded socket
Pneumatic
1.4408, PFA lined; 1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material; EN-GJL-250; EN-GJS-400-18-LT (GGG 40.3), PFA lined; EN-GJS-400-18-LT (GGG 40.3), PP lined; EN-GJS-400-18-LT, hard rubber lined
10 bar
80 ° C
-10 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2'')
GEMÜ 698
698
Clamp; Flange; Spigot; Thread; Threaded socket
Motorized
1.4408, PFA lined; 1.4408, investment casting; 1.4435 (316L), forged body material; 1.4435, investment casting material; EN-GJL-250; EN-GJS-400-18-LT (GGG 40.3), PFA lined; EN-GJS-400-18-LT (GGG 40.3), PP lined; EN-GJS-400-18-LT, hard rubber lined
10 bar
100 ° C
-10 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2'')
max. 150 °C
GEMÜ C60
C60
Butt weld spigot; Flare
Pneumatic
PFA
6 bar
150 ° C
-10 ° C
DN 4; DN 6; DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4''); DN 25 (1'')
GEMÜ C67
C67
Butt weld spigot; Flare
Manual
PFA
6 bar
150 ° C
-10 ° C
DN 4; DN 6; DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4''); DN 25 (1'')
GEMÜ R629
R629
Flange; Spigot; Union end
Motorized
ABS; Inliner PP-H, grey / outliner PP, reinforced; Inliner PVDF / outliner PP, reinforced; PVC-U
6 bar
80 ° C
-10 ° C
GEMÜ R639
R639
Flange; Spigot; Union end
Motorized
PP (GF); PP-H; PVC-U; PVDF
6 bar
80 ° C
-10 ° C
GEMÜ R647
R647
Flange; Spigot; Union end
Pneumatic
ABS; PP inliner / outliner; PVC-U; PVDF inliner
6 bar
80 ° C
-20 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2'')
GEMÜ R649
R649
Flange; Spigot; Union end
Motorized
ABS; Inliner PP-H, grey / outliner PP, reinforced; Inliner PVDF / outliner PP, reinforced; PP (GF); PVC-U; PVDF
10 bar
100 ° C
-10 ° C
GEMÜ R677
R677
Flange; Spigot; Union end
Manual
ABS; Inliner PP-H, grey / outliner PP, reinforced; Inliner PVDF / outliner PP, reinforced; PP (GF); PP inliner / outliner; PVC-U; PVDF
10 bar
80 ° C
-20 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4'')
GEMÜ R690
R690
Flange; Spigot; Union end
Pneumatic
ABS; Inliner PP-H, grey / outliner PP, reinforced; Inliner PVDF / outliner PP, reinforced; PP (GF); PVC-U; PVDF
10 bar
80 ° C
-20 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2''); DN 65 (2 1/2''); DN 80 (3''); DN 100 (4'')
GEMÜ R693
R693
Flange; Spigot; Union end
Motorized
ABS; Inliner PP-H, grey / outliner PP, reinforced; PVC-U; PVDF
10 bar
80 ° C
-20 ° C
DN 15 (1/2''); DN 20 (3/4''); DN 25 (1''); DN 32 (1 1/4''); DN 40 (1 1/2''); DN 50 (2'')
GEMÜ SUB
SUB
Clamp; Hose barb
PP-R natural
4; 9 bar
40 ° C
5 ° C
DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4''); DN 25 (1'')
max. 134 °C
GEMÜ SUHK
SUHK
Clamp; Hose barb
Manual
PP-R natural
4; 9 bar
40 ° C
5 ° C
DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4''); DN 25 (1'')
max. 134 °C
GEMÜ SUPM
SUPM
Clamp; Hose barb
Pneumatic
Linear actuator
PP-R natural
4; 9 bar
40 ° C
5 ° C
DN 8 (1/4''); DN 10 (3/8''); DN 15 (1/2''); DN 20 (3/4''); DN 25 (1'')
max. 134 °C