Globe valves

GEMÜ 312

Media temperature: -10 to 180 °C
Ambient temperature*: -10 to 60 °C
Operating pressure*: 0 to 16 bar
Nominal sizes*: DN 15 to 100
Body configurations: Multi-port body
Connection types: Flange
Connection standards: ANSI | DIN | EN | ISO
Body materials: 1.4408, investment casting material
Seat seal materials: PTFE | PTFE, reinforced
Conformities: EAC | Oxygen

GEMÜ 314

Media temperature: -10 to 180 °C
Ambient temperature*: -10 to 60 °C
Operating pressure*: 0 to 16 bar
Nominal sizes*: DN 15 to 50
Body configurations: Multi-port body
Connection types: Threaded connection
Connection standards: ANSI | DIN | EN | ISO
Body materials: CC499K, cast bronze material
Seat seal materials: PTFE | PTFE, reinforced
Conformities: EAC

GEMÜ 343

Media temperature:-10 to 250 °C
Ambient temperature:-10 to 60 °C
Operating pressure :0 to 40 bar
Nominal sizes:DN 15 to 100
Body configurations:Multi-port body
Connection types:Flange | Threaded connection
Connection standards:ANSI | DIN | EN | ISO
Body materials:1.4408, investment casting material | CC499K, cast bronze material
Seat seal materials:PTFE | PTFE, reinforced
Supply voltage:24 V DC
Actuating speed:max. 6 mm/s
Protection class:IP 65
Conformities:EAC

GEMÜ 352

Media temperature :-10 to 180 °C
Ambient temperature:-10 to 60 °C
Operating pressure :0 to 16 bar
Nominal sizes:DN 15 to 100
Body configurations:Multi-port body
Connection types:Flange
Connection standards:ANSI | EN | ISO
Body materials:1.4408, investment casting material
Seat seal materials:PTFE | PTFE, reinforced
Conformities:ATEX | EAC | Oxygen

GEMÜ 354

Media temperature: -10 to 180 °C
Ambient temperature*: -10 to 60 °C
Operating pressure*: 0 to 16 bar
Nominal sizes*: DN 15 to 50
Body configurations: Multi-port body
Connection types: Threaded connection
Connection standards: DIN | ISO
Body materials: CC499K, cast bronze material
Seat seal materials: PTFE | PTFE, reinforced
Conformities: ATEX | EAC | Oxygen

GEMÜ 507

Media temperature :-10 to 180 °C
Ambient temperature:-10 to 60 °C
Operating pressure :0 to 25 bar
Nominal sizes:DN 6 to 80
Body configurations:2/2-way body | Angle valve body
Connection types:Clamp | Flange | Spigot | Threaded connection
Connection standards:ANSI | ASME | BS | DIN | EN | ISO | JIS | NPT | SMS
Body materials:1.4408, investment casting material | 1.4435 (316L), block material | 1.4435 (316L), forged material | 1.4435, investment casting material
Seat seal materials:PEEK | PTFE | PTFE, reinforced
Conformities:ATEX | CRN | EAC | FDA | Oxygen | Reg. (EU) No. 10/2011 | Regulation (EC) No. 1935/2004 | Regulation (EC) No. 2023/2006 | TA Luft (German Clean Air Act) | USP

GEMÜ 514

Media temperature :-10 to 210 °C
Ambient temperature:-10 to 60 °C
Operating pressure :0 to 25 bar
Nominal sizes:DN 8 to 80
Body configurations:2/2-way body | Angle valve body
Connection types:Flange | Spigot | Threaded connection
Connection standards:ANSI | ASME | BS | DIN | EN | ISO | JIS | NPT | SMS
Body materials:1.4408, investment casting material | 1.4435, investment casting material | CC499K, cast bronze material
Seat seal materials:1.4404 | PTFE | PTFE, reinforced
Conformities:CRN | EAC | FDA | FMEDA | Oxygen | Reg. (EU) No. 10/2011 | Regulation (EC) No. 1935/2004 | TA Luft (German Clean Air Act)

GEMÜ 530

Media temperature :-40 to 210 °C
Ambient temperature:-20 to 60 °C
Operating pressure :0 to 40 bar
Nominal sizes:DN 15 to 100
Body configurations:2/2-way body
Connection types:Flange
Connection standards:ANSI | ASME | EN | ISO | JIS
Body materials:1.4408, investment casting material | EN-GJS-400-18-LT, SG iron material
Seat seal materials:PTFE | PTFE, reinforced
Conformities:ATEX | CRN | EAC | FDA | FMEDA | Oxygen | Reg. (EU) No. 10/2011 | Regulation (EC) No. 1935/2004 | TA Luft (German Clean Air Act)

GEMÜ 532

Media temperature :-10 to 210 °C
Ambient temperature:-10 to 60 °C
Operating pressure :0 to 40 bar
Nominal sizes:DN 15 to 100
Body configurations:2/2-way body
Connection types:Flange
Connection standards:ANSI | ASME | EN | ISO | JIS
Body materials:1.4408, investment casting material | EN-GJS-400-18-LT, SG iron material
Seat seal materials:1.4404 | PTFE | PTFE, reinforced
Conformities:CRN | EAC | FDA | FMEDA | Oxygen | Reg. (EU) No. 10/2011 | Regulation (EC) No. 1935/2004 | TA Luft (German Clean Air Act)

GEMÜ 533

Media temperature:-10 to 180 °C
Ambient temperature:0 to 60 °C
Operating pressure :0 to 40 bar
Nominal sizes:DN 15 to 50
Body configurations:2/2-way body
Connection types:Flange
Connection standards:ANSI | EN | JIS
Body materials:1.4408, investment casting material | EN-GJS-400-18-LT, SG iron material
Seat seal materials:1.4404 | PTFE | PTFE, reinforced
Supply voltage:24 V DC
Actuating speed:max. 3 mm/s
Protection class:IP 65
Conformities:EAC | FDA | Regulation (EC) No. 1935/2004

GEMÜ 534

Media temperature: -10 to 180 °C
Ambient temperature*: 0 to 60 °C
Operating pressure*: 0 to 40 bar
Nominal sizes*: DN 15 to 100
Body configurations: 2/2-way body
Connection types: Flange
Connection standards: ANSI | ASME | EN | ISO | JIS
Body materials: 1.4408, cast stainless steel material | EN-GJS-400-18-LT, SG iron material
Seat seal materials: PTFE | PTFE, reinforced
Conformities: ATEX | CRN | EAC | FDA | Functional safety | Oxygen | Reg. (EU) No. 10/2011 | Regulation (EC) No. 1935/2004 | TA Luft (German Clean Air Act)

GEMÜ 536

Media temperature :-10 to 210 °C
Ambient temperature:-10 to 60 °C
Operating pressure :0 to 40 bar
Nominal sizes:DN 32 to 150
Body configurations:2/2-way body
Connection types:Flange
Connection standards:ANSI | EN | ISO
Body materials:1.4408, investment casting material | EN-GJS-400-18-LT, SG iron material
Seat seal materials:PTFE | PTFE, reinforced
Conformities:ATEX | CRN | EAC | FMEDA

GEMÜ 537

Media temperature: -10 to 180 °C
Ambient temperature*: -10 to 60 °C
Operating pressure*: 0 to 40 bar
Nominal sizes*: DN 15 to 50
Body configurations: 2/2-way body
Connection types: Flange
Connection standards: ANSI | ASME | EN | ISO | JIS
Body materials: 1.4408, investment casting material | EN-GJS-400-18-LT, SG iron material
Seat seal materials: PTFE, reinforced
Conformities: ATEX | CRN | EAC | FDA | Oxygen | Reg. (EU) No. 10/2011 | Regulation (EC) No. 1935/2004 | Regulation (EC) No. 2023/2006 | TA Luft (German Clean Air Act) | USP

GEMÜ 539

Media temperature:-10 to 250 °C
Ambient temperature:-10 to 60 °C
Operating pressure :0 to 40 bar
Nominal sizes:1/2'' (DN 15) to 4'' (DN 100)
Body configurations:2/2-way body
Connection types:Flange
Connection standards:ANSI | ASME | EN | ISO | JIS
Body materials:1.4408, investment casting material | EN-GJS-400-18-LT, SG iron material
Seat seal materials:1.4404 | PTFE | PTFE, reinforced
Supply voltage:24 V DC
Actuating speed:max. 6 mm/s
Protection class:IP 65
Conformities:EAC | FDA | Reg. (EU) No. 10/2011 | Regulation (EC) No. 1935/2004 | TA Luft (German Clean Air Act)

GEMÜ 543

Media temperature:-40 to 180 °C
Ambient temperature:0 to 60 °C
Operating pressure :0 to 25 bar
Nominal sizes:DN 6 to 50
Body configurations:2/2-way body | Angle valve body
Connection types:Clamp | Flange | Spigot | Threaded connection
Connection standards:ANSI | ASME | BS | DIN | EN | ISO | NPT | SMS
Body materials:1.4408, investment casting material | 1.4435 (316L), forged material | 1.4435, investment casting material | CC499K, cast bronze material
Seat seal materials:PTFE | PTFE, reinforced
Supply voltage:24 V DC
Actuating speed:max. 3 mm/s
Protection class:IP 65
Conformities:EAC | FDA | Regulation (EC) No. 1935/2004 | TA Luft (German Clean Air Act)

GEMÜ 549

Media temperature:-40 to 180 °C
Ambient temperature:-10 to 60 °C
Operating pressure :0 to 25 bar
Nominal sizes:DN 10 to 80
Body configurations:2/2-way body | Angle valve body
Connection types:Clamp | Flange | Spigot | Threaded connection
Connection standards:ANSI | ASME | BS | DIN | EN | ISO | NPT | SMS
Body materials:1.4408, investment casting material | 1.4435 (316L), forged material | 1.4435, investment casting material
Seat seal materials:1.4404 | PTFE | PTFE, reinforced
Supply voltage:24 V DC
Actuating speed:max. 6 mm/s
Protection class:IP 65, IP 61
Conformities:EAC | FDA | Oxygen | Reg. (EU) No. 10/2011 | Regulation (EC) No. 1935/2004 | TA Luft (German Clean Air Act)

GEMÜ 550

Media temperature :-40 to 210 °C
Ambient temperature:-20 to 60 °C
Operating pressure :0 to 25 bar
Nominal sizes:DN 6 to 80
Body configurations:2/2-way body | Angle valve body
Connection types:Clamp | Flange | Spigot | Threaded connection
Connection standards:ANSI | ASME | BS | DIN | EN | ISO | NPT | SMS
Body materials:1.4408, investment casting material | 1.4435 (316L), block material | 1.4435 (316L), forged material | 1.4435, investment casting material
Seat seal materials:1.4404 | PTFE | PTFE, reinforced
Conformities:ATEX | CRN | EAC | FDA | FMEDA | Oxygen | Reg. (EU) No. 10/2011 | Regulation (EC) No. 1935/2004 | Regulation (EC) No. 2023/2006 | TA Luft (German Clean Air Act) | USP

GEMÜ 553

Media temperature :-10 to 180 °C
Ambient temperature:0 to 60 °C
Operating pressure :0 to 25 bar
Nominal sizes:DN 15 to 20
Body configurations:Multi-port body
Connection types:Threaded connection
Connection standards:DIN | ISO | NPT
Body materials:1.4408, investment casting material
Seat seal materials:PTFE
Conformities:FDA | Reg. (EU) No. 10/2011 | Regulation (EC) No. 1935/2004

GEMÜ 554

Media temperature :-10 to 180 °C
Ambient temperature:0 to 60 °C
Operating pressure :0 to 25 bar
Nominal sizes:DN 6 to 80
Body configurations:2/2-way body | Angle valve body
Connection types:Clamp | Flange | Spigot | Threaded connection
Connection standards:ANSI | ASME | BS | DIN | EN | ISO | NPT | SMS
Body materials:1.4408, investment casting material | 1.4435 (316L), forged material | 1.4435, investment casting material | CC499K, cast bronze material
Seat seal materials:NBR | PFA | PTFE | PTFE, reinforced
Conformities:ATEX | CRN | EAC | FDA | FMEDA | Oxygen | Reg. (EU) No. 10/2011 | Regulation (EC) No. 1935/2004 | TA Luft (German Clean Air Act) | USP

GEMÜ 555

Media temperature:14 to 365 °F
Ambient temperature:14 to 140 °F
Operating pressure :0 to 150 psi
Nominal sizes:1/4'' (DN 8) to 3'' (DN 80)
Body configurations:2/2-way body
Connection types:Clamp | Spigot
Connection standards:ASME | DIN | EN | ISO
Body materials:1.4435 (316L), block material | 1.4435, investment casting material
Seat seal materials:PTFE
Conformities:ATEX | CRN | EAC | FDA | FMEDA | Oxygen | Reg. (EU) No. 10/2011 | Regulation (EC) No. 1935/2004 | Regulation (EC) No. 2023/2006 | USP

GEMÜ 565

Media temperature :-20 to 80 °C
Ambient temperature:-15 to 55 °C
Operating pressure :0 to 6 bar
Nominal sizes:DN 3 to 15
Body configurations:2/2-way body
Connection types:Threaded connection | Union end
Connection standards:DIN
Body materials:PVC-U | PVDF
Seat seal materials:EPDM | FKM
Conformities:EAC

GEMÜ 566

Media temperature :0 to 90 °C
Ambient temperature:-15 to 60 °C
Operating pressure :0 to 6 bar
Nominal sizes:DN 8 to 20
Body configurations:2/2-way body
Connection types:Clamp | Threaded connection
Connection standards:
Body materials:ASTM A351 CF3M
Seat seal materials:EPDM | FKM
Conformities:EAC | FDA
Supply voltage:
Actuating speed:max. 3 mm/s
Protection class:

GEMÜ R563

Media temperature:0 to 80 °C
Ambient temperature:0 to 60 °C
Operating pressure :0 to 6 bar
Nominal sizes:DN 10 to 15
Body configurations:2/2-way body
Connection types:Threaded connection | Union end
Connection standards:DIN | EN | ISO
Body materials:PVC-U | PVDF
Seat seal materials:PEEK
Supply voltage:24 V DC
Actuating speed:max. 3 mm/s
Protection class:IP 65

GEMÜ Globe Control Valves and Positioners

For control tasks

GEMÜ Globe Control Valves and Positioners

Areas of application and industrial sectors

Sugar centrifugation